SEM sem520 в лизинг

1. * * Operating total weight * *: 20000kg (20 tons), with each front and rear axle carrying 10000kg of armored engineering machine ..

2. * * Overall dimensions for transportation: 6250mm in length, 2340mm in width, and 3200mm in height

3. * * Minimum turning radius (inner side of steel wheel) * *: 6350mm

4. * * Steering angle * *: ± 33 °; Frame swing angle ± 12 °

5. * * Maximum climbing ability (no vibration) * *: 34% SEM mountain worker ..

##2、 Power system parameters

1. * * Engine model * *: Weichai WP6G175E20/WP6G175E301 (National III mechanical fuel injection model, overseas compatible with inferior diesel) SEM Mountain Engineer ..

2. * * Rated power * *: 129kW (173 horsepower) @ 2000rpm

3. * * Fuel tank capacity * *: 262L

4. Hydraulic oil tank capacity: 80L Alibaba medium ..

5. * * Heat dissipation system * *: Modular independent heat dissipation, suitable for environments up to 43 ℃ high temperature construction sites

##3、 Core parameters of steel wheel compaction (core selling point of foreign trade)

1. * * Steel wheel width * *: 2130mm

2. Steel wheel diameter: 1600mm; wheel wall thickness: 50mm (thickened and wear-resistant, with a compaction efficiency 10% -15% higher than ordinary industry models) SEM mountain worker ..

3. * * Static line load * *: 461N/cm

4. * * Vibration system dual frequency dual amplitude

-High frequency mode: 30Hz, amplitude 2.0mm, excitation force 360kN

-Low frequency mode: 28Hz, amplitude 1.0mm, excitation force 208kN Alibaba medium ..

5. * * Effective compaction depth * *: maximum 40cm subgrade soil layer

##4、 Walking and chassis configuration

1. * * Driving speed

-Low speed operation mode: 2.98km/h

-High speed transition gear: 9.6km/h

2. * * Tire Specification * *: 205-25 Engineering Off road Tire

3. * * Drive axle * *: Eaton limited slip differential rear axle, does not slip on muddy or steep slopes

4. * * Transmission * *: Hangzhou Gear Electronic Control Power Shifting Transmission, easy and smooth operation

##5、 Cab and electronic control configuration

1. * * Cab * *: The cab can be tilted forward and flipped over (manual flipping is standard, hydraulic flipping is optional), making it easy to maintain the hydraulic pump and gearbox

2. * * Instrument system * *: Digital compaction frequency meter, real-time monitoring of vibration conditions; Level 3 fault sound and light alarm system, quickly locate faults

3. * * Control * *: Rotary electronic throttle, precise and stable operation