Новый Низкорамный полуприцеп Meusburger 3-Achs-Semi-Satteltieflader Roadrunner Industrie
Опубликовано: 1г.
Опубликовано: 1г.
Вам нужна доставка?
Chassis:
solid welded steel frame construction with crank of the front frame and an even loading
platform
chamfer at the rear 1.835 x 180 mm
frame neck 165 mm with external longitudinal beams
chamfer at the end of the gooseneck ca. 850 x 150 mm
low bed with telescopic central beam, telescopic length ca. 4.300 mm, pneumatic locking
with middle bridge (length: 300 mm)
strengthened frame for a point loading of 40 to spread over 4,5 m in non-telescopic condition
in the centre of gravity
2 positions for king pin with changeable 2“-king pin
Rear underrun = extended rear cover plate
Prop stands at the rear
U-beam at the rear for ramps
Open storage compartment at the front of the loading floor
At the front: stanchion pockets to store stanchions (without stanchions)
Landing legs:
Mechanical 24 to landing legs with handling from 1 side and thrust balance
Axles:
BPW-air suspension-axles (each axle 10 to axle load)
S-cam brake 300/200 mm, asbestos-free brake pads
automatic brake adjuster
ECAS-system
3 ride heights; 1. Ride height; 2. -35 mm; 3. +35 mm
Total stroke ca. 200 mm
3rd axle is a self steering axle, the axle will be locked by using the reverse gear or by hand
Hubodometer
Pressure gauge for loading
Rims and tyres:
12 steel disc wheels 6,75“, 10-hole, with offset (132 mm), centred
12 tyres 245/70 R 17,5 143/141J, tubeless
Mudguards:
Tin mudguards with Clear-Pass
Braking system:
Two line brake with EBS-E incl. RSS
EBS (WABCO 4S3M)
Spring controlled parking brake
Electrical installment:
24 Volt. 2x 7-pin and 1x 15-pin sockets
2x 6-chamber-rear-lights
Side marker lights
1 extendable holder for warning light
1x reversing light Ultra Beam Hella 2ZR 997506-391 at the rear embedded in the cover plate
Floor:
35 mm Meranti-wood (OMEGA floor)
Additional equipment:
Spare wheel holder (without spare wheel)
Side collision protection (aluminium)
4 wheel chokes with holder
4 pairs of heavy-load-lashing-rings (13,4 to), foldable
8 pairs of openings in the lateral outer frame for lashing
5 pairs of lashing rings (4 to) embedded in the lateral outer frame
4x extendable warning plates
4x holder for warning plates (to put in stanchion pockets)
13 pairs of stanchion pockets
with 2 cross rows of stanchion pockets from the outer frame to the central beam
8 planks (hardwood) with plug-in-bracket (to put on both sides in the stanchion pockets) to use as a compensation support
2 additional holdings for the compensation support on the gooseneck.
1 ECE-panel pluggable
1 pair of lashing brackets on the loading floor(4 to)
Central lubrication system BEKA-MAX with time switch
2x tow rings at the rear (each 13,4 to)
Painting:
Cleaning with steel granulate, zinc spraying (telescope included) and priming
Chassis/wheel hubs/frame: DB 7350 nova grey
rims: silver
plastic parts black unpainted
Contour marking: yellow (lateral and rear)
Вам нужна доставка?
Получить расчет стоимости доставки
Вам нужна доставка?
Получить расчет стоимости доставки